ARUNRAMANATHAN
06-12 07:24 AM
immigration1111
Please confirm this .... couple of things USCIS grants for professional with this situvation
1) He can file a petition saying that his skill sets are still needed here and are in demand and request to grant him X no of months of stay (I belive that it is 3 Months )
2) Even if he is out of status for less 180 Days it is ignored by USCIS during the process of GC9I know this not relavant to your question, but just in case if you are not aware
3) USCIS looks for just the pervious month pay slip .... Say he is OO job June 1st week .... He can file for the H1B Transfer untill end of July ....
Ofcourse he would be safe if the pervious H1B is not canceled .... As he reigned he should be in OK terms with his employee
Hope this helps and Good Luck to him !
Arun
Please confirm this .... couple of things USCIS grants for professional with this situvation
1) He can file a petition saying that his skill sets are still needed here and are in demand and request to grant him X no of months of stay (I belive that it is 3 Months )
2) Even if he is out of status for less 180 Days it is ignored by USCIS during the process of GC9I know this not relavant to your question, but just in case if you are not aware
3) USCIS looks for just the pervious month pay slip .... Say he is OO job June 1st week .... He can file for the H1B Transfer untill end of July ....
Ofcourse he would be safe if the pervious H1B is not canceled .... As he reigned he should be in OK terms with his employee
Hope this helps and Good Luck to him !
Arun
blonde hairstyles 2011 pictures. Natural Blonde Hairstyles
chanukya
05-23 07:35 AM
As many of you have been following, there are some provisions that benefit folks with advanced degree in STEM from US universities by exempting them from the Visa quota. I think CIR in its current form has a provision and the Cornyn (4005) and the Brownback (4058) ammendments that are yet to be introduced also have some such provisions.
My question is, will people who qualify under this category still have to clear labor? If so, then those of us who are stuck in BEC can only wait and watch while those who have cleared using PERM will go ahead. We could transfer from BEC to PERM but this is not as easy as it sounds. We could also apply fresh in PERM (as retrogression will not apply, hence PD will not matter) but this is also not as easy as it sounds for folks who are in 7th year or greater in H1B.
Any thoughts or comments?
CORNYN amendment�Very cleverly worded..Regarding US Masters and above...
On Careful reading of SA4005...
On one hand exempts US any Masters from Quota but does not exempt from LC any US Masters unless such US Masters and above are "Member of Professions" ???? with advanced degrees.
So, US Masters(STEM or no STEM) and above still have to go thru LC Process....unless they are "Member of Professions", who will be handled as a special case.
Above "Memebr of Professions" open to many legal interpretations and INS dictionary may say something like it means only Doctors/Lawyers....?
http://immigrationvoice.org/forum/at...6&d=1147880856
Bottom Line, US Masters thru any bill or its amendments cannot avoid LC process.
Only difference is in CORNYN amendment any US Masters (not necessarily STEM US Masters) are exempt from quota.
And your assessment is correct, PERM ..US Masters stand to benefit immedeatly.
My question is, will people who qualify under this category still have to clear labor? If so, then those of us who are stuck in BEC can only wait and watch while those who have cleared using PERM will go ahead. We could transfer from BEC to PERM but this is not as easy as it sounds. We could also apply fresh in PERM (as retrogression will not apply, hence PD will not matter) but this is also not as easy as it sounds for folks who are in 7th year or greater in H1B.
Any thoughts or comments?
CORNYN amendment�Very cleverly worded..Regarding US Masters and above...
On Careful reading of SA4005...
On one hand exempts US any Masters from Quota but does not exempt from LC any US Masters unless such US Masters and above are "Member of Professions" ???? with advanced degrees.
So, US Masters(STEM or no STEM) and above still have to go thru LC Process....unless they are "Member of Professions", who will be handled as a special case.
Above "Memebr of Professions" open to many legal interpretations and INS dictionary may say something like it means only Doctors/Lawyers....?
http://immigrationvoice.org/forum/at...6&d=1147880856
Bottom Line, US Masters thru any bill or its amendments cannot avoid LC process.
Only difference is in CORNYN amendment any US Masters (not necessarily STEM US Masters) are exempt from quota.
And your assessment is correct, PERM ..US Masters stand to benefit immedeatly.
blonde hairstyles 2011 pictures. long londe hairstyles 2011.
srarao
07-19 04:23 PM
I read some posts and they say we need to go to local heath dept.If some one has exp ,I just wanted their suggestion
blonde hairstyles 2011 pictures. londe hairstyles for 2011.
for_ac21iv
06-01 01:21 PM
Hi,
I have been a silent observer of the posts here in the IV.
I like the posts in general, the ideas in particular.
I am also a member of immigrationportal forums and have
seen a lot of interest in members there towards separating
the legal provisions in the senate's CIR S 2611 bill into a new bill/law,
and see if it can be passed quickly, as the law makers,
do not seem to have any problem with changes for legal immigrants
in it.
- Is this possible ?
- Can IV help at this critical times ?
- What would it take to get the House pick the legal immigrant
items in CIR S 2611 and pass it first ?
regards,
ac
I have been a silent observer of the posts here in the IV.
I like the posts in general, the ideas in particular.
I am also a member of immigrationportal forums and have
seen a lot of interest in members there towards separating
the legal provisions in the senate's CIR S 2611 bill into a new bill/law,
and see if it can be passed quickly, as the law makers,
do not seem to have any problem with changes for legal immigrants
in it.
- Is this possible ?
- Can IV help at this critical times ?
- What would it take to get the House pick the legal immigrant
items in CIR S 2611 and pass it first ?
regards,
ac
more...
blonde hairstyles 2011 pictures. short londe hairstyles 2011 pictures. Short Blonde Haircuts and short
desi3933
02-26 06:04 PM
Original LCA salary is like 58k and current one is 40k
Odd are that you are out of status and this may prevent you seeking another change of status.
Please consult your attorney.
_________________
Not a legal advice.
Odd are that you are out of status and this may prevent you seeking another change of status.
Please consult your attorney.
_________________
Not a legal advice.
blonde hairstyles 2011 pictures. londe hairstyles 2011 for
pappu
08-16 12:16 PM
While it is good idea to move to UK there are similar protests going in UK due to job loss and lot of Work Permits going in favor of Indians. Recently I read an article which says that 18,000 Visas out of 30,000 Visa(High Tech) are granted to Indians.
UK based companies pulled out their operations from India stating the quality of work from Indian operations is very poor.
Adding fuel to fire Mr Mittal relentless aggression to acquire companies is all creating chaos in UK.
My 2 cents
yes correct.
they have their own immigrationvoice http://www.vbsi.org.uk/
UK based companies pulled out their operations from India stating the quality of work from Indian operations is very poor.
Adding fuel to fire Mr Mittal relentless aggression to acquire companies is all creating chaos in UK.
My 2 cents
yes correct.
they have their own immigrationvoice http://www.vbsi.org.uk/
more...
blonde hairstyles 2011 pictures. Short Cut Blonde Hairstyle
geesee
07-20 08:42 AM
^^^^^ bumping the old thread up...
Joined today..
Wanted to request IV Core to start an Orkut group but found out we already have one...
Cant believe there are only 33 members...
Orkut is a great way of publicing ImmigrationVoice among your friends.. not only in US but also in the country you came from...
Although I think Orkut community should not be used for any discussions.. It should only be used to make this site popular...
Joined today..
Wanted to request IV Core to start an Orkut group but found out we already have one...
Cant believe there are only 33 members...
Orkut is a great way of publicing ImmigrationVoice among your friends.. not only in US but also in the country you came from...
Although I think Orkut community should not be used for any discussions.. It should only be used to make this site popular...
blonde hairstyles 2011 pictures. londe haircuts 2011.
arunmohan
05-07 02:39 PM
Yes I have same questions as coolduggar asked. I know lots of people are using AC21 right now and I am on same boat too.
more...
blonde hairstyles 2011 pictures. Shakira Hairstyle 2011
ashshef
08-31 12:44 AM
Unfortunately this won't help....of course assuming you find a way to do it :)
They look at the country of birth to determine the quota....not country of citizenship.
They look at the country of birth to determine the quota....not country of citizenship.
blonde hairstyles 2011 pictures. londe hairstyles 2011 men.
Juan28210
11-03 03:59 PM
Hi,
I'm on H1b visa. My employer refuses to pay for my medical insurance. Does anyone know if this is legal?
Thanks.
I'm on H1b visa. My employer refuses to pay for my medical insurance. Does anyone know if this is legal?
Thanks.
more...
blonde hairstyles 2011 pictures. londe hairstyles for 2011.
puskeygadha
05-22 11:33 AM
My question was
how long after the comment period the rule will be implemented from
past experience
how long after the comment period the rule will be implemented from
past experience
blonde hairstyles 2011 pictures. Blonde Emo Hairstyles 2011.A
sanjose
07-24 07:04 PM
I am a july 2nd 2007 filer with notice date Aug 23rd 2007. In response to my SR, I received the following reply:
"...... There is not currently a visa available to you based upon your country of birth, your employment-based category and your priority date. Your I-485 application cannot be adjudicated until there is a visa available to you. Your case is therefore awaiting visa availability for your category and further review by an Adjudications Officer. ......."
Many people have said that the July 2nd filers cases have been pre-adjudicated.
However the SR response clearly says that my case will not be adjudicated untill visa # will be avalable.
Does anybody know what is meant by pre-adjudication ?
What is difference between adjudication and pre-adjudication?
Thanks in advance for your replies. Any reply will be appreciated specially from the attorneys.
"pre-"
"...... There is not currently a visa available to you based upon your country of birth, your employment-based category and your priority date. Your I-485 application cannot be adjudicated until there is a visa available to you. Your case is therefore awaiting visa availability for your category and further review by an Adjudications Officer. ......."
Many people have said that the July 2nd filers cases have been pre-adjudicated.
However the SR response clearly says that my case will not be adjudicated untill visa # will be avalable.
Does anybody know what is meant by pre-adjudication ?
What is difference between adjudication and pre-adjudication?
Thanks in advance for your replies. Any reply will be appreciated specially from the attorneys.
"pre-"
more...
blonde hairstyles 2011 pictures. mens short londe hairstyles
howzatt
11-14 01:29 PM
Yes you are true, FP doesn't have anything to do with EAD approval.
However if you apply EAD online, then you will get FP notice as a part of the process.
good luck :)
We did not apply online. It is a paper-based application that reached USCIS on AUg 14th.
However if you apply EAD online, then you will get FP notice as a part of the process.
good luck :)
We did not apply online. It is a paper-based application that reached USCIS on AUg 14th.
blonde hairstyles 2011 pictures. londe hairstyles 2011 women.
waitnwatch
05-30 12:29 PM
This may already have been discussed but does everyone realize that the merit based system will remove backlogs by the backdoor. There will be no backlogs because you have to apply every year. And if by chance you reach the 6th year on H1-B and fail to get past the merit line for that year you have to leave. If this is not scary what is?
I would like to hear everyone's opinion on this.
I would like to hear everyone's opinion on this.
more...
blonde hairstyles 2011 pictures. Short Blonde Haircuts and
sree_99
02-01 07:11 PM
Sorry, if this is already discussed mutiple times. I was not able to find any Info.
My Wife needs to travel to India urgently. She is currently on F1 Visa and has EAD and Advance Parole.
While Coming back is it required to use AP or can she come back on F1. Please help me with some info or pointers to exisitng threads discussing this are greatly appreciated
Thanks,
-Sree
My Wife needs to travel to India urgently. She is currently on F1 Visa and has EAD and Advance Parole.
While Coming back is it required to use AP or can she come back on F1. Please help me with some info or pointers to exisitng threads discussing this are greatly appreciated
Thanks,
-Sree
blonde hairstyles 2011 pictures. Short londe hairstyles 2011
asphaltcowboy
05-27 10:31 AM
it's gotta be Soul's... the worst thing is the flippin' page transitions! I'm growing old waiting for them! congrats to everyone with a **** website
;)
;)
more...
blonde hairstyles 2011 pictures. mid length londe hairstyles
irfankhan25
04-06 04:33 AM
You can import PDF-compatible Adobe Illustrator files (.ai) directly into an open document in your Microsoft Expression Blend project.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
blonde hairstyles 2011 pictures. short londe hairstyles 2011. short londe haircuts 2011.
gk_2000
01-26 09:41 PM
Can he add an amendment to divide spillover equally between EB2 and EB3 India. This will help a lot.
Seeing the number of reds of this kind of views, I feel IV should split into two camps, red and green. Then I will also start expressing these views and embrace red....
Seeing the number of reds of this kind of views, I feel IV should split into two camps, red and green. Then I will also start expressing these views and embrace red....
blonde hairstyles 2011 pictures. londe hairstyles 2011 are
irfankhan25
04-06 04:33 AM
You can import PDF-compatible Adobe Illustrator files (.ai) directly into an open document in your Microsoft Expression Blend project.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
ARUNRAMANATHAN
06-11 03:03 PM
Is there reason you say that I cannot port the PD ...? Please explain.
Arun
You cannot port your I-140 to the new company. So, your H1B will also get affected as it extn is based on the underlying I-140. The only way you can accomplish moving to company B is by filing for I-485 while still at Company A (if your dates are current), wait for 6 months and then, use the AC21 provision.
This is just my view. There might be better ways but, that is the only one I can think right now.
Arun
You cannot port your I-140 to the new company. So, your H1B will also get affected as it extn is based on the underlying I-140. The only way you can accomplish moving to company B is by filing for I-485 while still at Company A (if your dates are current), wait for 6 months and then, use the AC21 provision.
This is just my view. There might be better ways but, that is the only one I can think right now.
jeny
08-05 01:33 PM
Hi Friend,
i have sheduled for interview in July,some how i couldn't make it that time.I have requested to postpond for 3 months.Are they assinged any visa for me ? Are they going to call me for interview after 3 month.Can anyone tell me are they going to call me ? Please answer . Thanks
i have sheduled for interview in July,some how i couldn't make it that time.I have requested to postpond for 3 months.Are they assinged any visa for me ? Are they going to call me for interview after 3 month.Can anyone tell me are they going to call me ? Please answer . Thanks
No comments:
Post a Comment